[Tutorial] Custom intro using Autostart V5

Hi, this tutorial going to show you step by step of using AutoStart V5 to run cintro
Delete your previous Autostart components, example config.ROE
Connect your PSP to your computer

We going to start with AutoStart V5
1. Download the AutoStart V5.zip and then extract it
2. After extracted, you going to have two folder that is PSP and seplugins
3. Copy and paste PSP folder to the root of your memory stick, click yes when prompted

**if you don’t have seplugins folder inside memory stick, make one**

4. Open the seplugins folder; copy and paste the AutoStart.prx into your seplugins folder inside memory stick.
5. If you already have vsh.txt, what you do is add this line ms0:/seplugins/AutoStart.prx into the existing vsh.txt
6. If not, just copy the vsh.txt into your seplugins folder inside
memory stick.

Next is cintro_390
1. Download the cintro_390.rar and then extract it
2. After extracted, you going to have cintro_390 folder
3. Open the folder, copy and paste PSP folder to the root of your memory stick, click yes when prompted
4. Copy and paste Cintro.pmf to the root of memory stick

Go to your PSP
1. Go to Game, then memorystick
2. Launch AustoStart Configurator
3. Select on Autoboot (NOTHING) by pressing X button
4. Select on PMF by pressing X button
5. Now, you going to have Autoboot (ms0:/PSP/GAME/BOOT/EBOOT.PBP)
6. Press on R trigger, here you going to Enable autoboot by pressing X, Disable WLAN switch check by pressing X,
7. Exit the Autostart configurator by pressing X on Exit
8. Now, go to Recovery mode
9. Enable by pressing X on AutoStart.prx [VSH](Disabled)
10. After enabled it will be something like this AutoStart.prx [VSH](Enabled)

Exit recovery mode, then turn off your PSP completely by pressing power button for few seconds
And turn on again, hope it works for you, good luck.

Replacing cintro
rename the .pmf files you got to cintro.pmf and replace it
example, ff.pmf rename to cintro.pmf
place it to your memorystick root
IMAGES OF WHAT YOU HAVE TO DO IN PSP
http://www.consolespot.net/forums/attachments/psp-help-tutorials/6991d1222859223-tutorial-cintro-using-autostart-v5-tutorial.jpg
tips:
It is easier to replace the cintro by using applications that let you to rename,cut,paste,copy.Example:Xplora..you don't have to bother go to computer to replace it, make one cintro folder then access it using the application and copy/paste .pmf to root, rename it to cintro.pmf.

it is compatible with cxmb..

okay..here is the problem..for people with 3.90m33-3 or lower, i think it will have some looping issue..i've just realize that cintro is looping in 3.90 after i downgrade to it..maybe its not compatible.

2nd edit:found that for some reason in my psp..running on 5.00m33..the kernel need to be 5.XX in order to run the cintro..




THANKS TO biller01 FOR THE VIDEO!

THANKS TO roe-ur-boat,Jazzer and richie for the AutoStart, coolj for the cintro_390,DAX for CFW

Download AutoStart_v5
Download Cintro_390